Before starting an encounter from your CORE Attachment, be sure you have paired it with the Eko App (Connect an Eko Device with the Eko App) and have adjusted your device and workflow settings (Eko Account, App, and Device Settings). The app will automatically connect to the most recently connected Eko device when it is powered on.
Starting an encounter from your CORE Attachment is easy with these simple steps:
-
Turn on your CORE Attachment and confirm it has connected to your phone and the Eko App by looking for the Bluetooth symbol on the upper left of the screen.
- Place the device on the patient.
- Firmly press the O button that’s between the volume buttons on the CORE Attachment, or, if you have the Record Automatically setting turned on, the recording starts when a good signal is detected.
- To manually stop the recording before the timer ends, firmly press the O button again. Otherwise, the recording automatically stops after the length of time selected in the Recording Length* setting in the Eko App.
- Review and/or assign the encounter to a patient* in the Eko App. Here's how.
*Some features may require a paid Eko+ membership or enterprise health system enablement.