Update an Eko device's firmware

Eko periodically releases new features to improve your stethoscope. You'll be notified of any device updates when you connect your Eko device to the Eko App. Updates can be either:

  • Required: You must update the firmware before continuing with the app or device.

  • Optional: You can update the firmware when you choose.

The updates are done through the app. Here's how.

Note: Your Eko App screens may differ from what's shown here.

Required update

  1. When a firmware update is available for your Eko device, once your device is connected to the Eko App, a screen shows with the information about the update.

    Eko_App_Firmware_Update_Required.png
  2. Click Install Update. The screen shows the progress of the update.

    Eko_App_Firmware_Update_Progress.png

Optional update

  1. When a firmware update is available for your Eko device, once your device is connected to the Eko App, a screen shows with the information about the update.

    Eko_App_Firmware_UpdateOptional.png
  2. Click Install Update to install the update now.

  3. Click Install Later to install the update at a later time.

  4. If you choose to install later, the Menu screen shows that a device update is available and an orange dot shows on the Menu button until the update is installed. Tap Get Started when you're ready to install the update.

    Eko_App_Firmware_Update_Optional_Menu_copy.png

 

LBL:

0002446 Rev.2.0

Date of Issue:

September 12, 2023

Was this article helpful?

Your feedback helps us improve our content

Related articles